Thomas Denby Metro 1.3 Bowl Inset Or Undermount Gloss White Ceramic Kitchen Sink – 595 X 520mm

Features:

• Totally non-porous surface – the ultra smooth ceramic surface is the most hygienic material for sinks and is the easiest to keep clean – scroll down for more detailed Care and Cleaning Instructions
• Heat resistant to 1200°C which means that pots and pans straight from the stove can sit safely on the sink without causing damage
• Resistant to all household chemicals including neat bleach
• Extreme hardness – the glazed surface cannot be scratched by cutlery through normal use
• Practical 1.3 bowl design with the main bowl on the left
• Extra-slim partition wall between the bowls for a more minimalist look
• Suitable for inset or undermount installation in solid surface worktops only – wood, stone, granite or synthetic
• Waste kit sold separately – please see our recommended extras
• Lifetime guarantee

Dimensions:

• Depth – 520mm
• Height – 194mm
• Width – 595mm
• Minimum cabinet size – 600mm (inset installation)

Care and Cleaning Instructions
To maintain the sinks sheen, avoid using abrasive cleaners as these will dull the surface. A weekly clean using a dilute solution of bleach is ideal for keeping the sink surface shiny and hygienic. If you live in a hard water area and notice mineral deposits or limescale build up on the sink, soak them in a solution of 3 parts hot water to 1 part white vinegar. Marks left by saucepans can be removed using ‘Shiny Sink’ or ‘Astonish’ paste. Always remember to finish off by rinsing your sink with clean water to remove any chemical residue, then dry with a soft cloth to prevent more limescale build-up.

Please note: This ceramic sink may have a tolerance of +/-2% on the specified measurements. This is due to the manufacturing process. As ceramic is a natural material, once it has been fired in the kiln it can expand or contract ever so slightly causing slight fluctuations to the measurements stated above and in the spec box. For this reason, we strongly recommend that you wait until you have received your sink and can measure it for templating purposes before making any cuts in your worktop. If you would like more information, please feel free to contact our sales team here via live chat or email